Carborane and cyanine conjugated galactose targeted amphiphilic copolymers for potential near infrared imaging-guided boron neutron capture therapy (BNCT)

Near infrared fluorescent galactose targeted glycopolymer containing m-carborane has been synthesized through ring open and atom transfer radical polymerization, followed by post-functionalization with a cyanine NIR dye. The copolymer could self-assemble into micelles which work as a potential agent for imaging-guided boron neutron capture therapy. The NIR micelles revealed no cytotoxicity for HepG2 cells. An enhanced and fast endocytosis due to the specific interaction between the HepG2 cells and the glycopolymer could be traced by fluorescence microscopy, and the bioimaging makes it possible to trace the nanoparticles and provides information where and when the neutron irradiation should be triggered.     

高速纺纱锭子弹性管减振机制与振动特性

为探究锭子弹性管的减振机制,将其开螺旋槽部分作为矩形弹簧模型处理,建立了减振弹性管的抗弯刚度及底部振幅的理论数学模型,并利用MatLab仿真分析了减振弹性管关键结构参教与其抗弯刚度和底部振动特性的耦合关系,同时结合有限元仿真及模态测试得到弹性管各阶固有频率。研究结果表明:随着槽宽和圈数的增大,刚度降低,底部振幅增加;随着壁厚、螺距、螺旋升角、弹性模量的增大,刚度增加,底部振幅降低;弹性管固有频率和锭子系统共振频率区间一致,且工作频率有效避开了共振频率。     

庞庞塔煤矿综采工作面恒压供液系统研究

结合庞庞塔煤矿综采工作面的具体应用现状,设计了变频驱动控制的恒压供液系统。在泵出口管道中设置压力传感器、流量计等,同时在每台液压支架乳化液入口处安装一个蓄能器。压力、流量等数值由各种传感器来进行采集,并把监测到的数据反馈给PLC控制器。PLC控制器通过把传感器送来的数据和系统预设好的数值进行比较来判断供液系统是否需要加压或着减压,以此通过变频器来改变电机的转速,以实现供液系统维持恒压状态。     

SC15/182F分体式电驱梭车的研制及应用

梭车是短壁机械化开采技术的重要运输设备。简要介绍了现有梭车的现状及应用局限,详细阐述了分体梭车的主要设计思路,重点介绍了薄壁分体式机架的结构特征,阐述了分体梭车在模块化卷电缆装置、四象限变频驱动等方面的技术升级,并介绍了分体梭车在国内矿区的应用情况。     

A multi-tone central divided difference frequency tracker with adaptive process noise covariance tuning

The problem of real-time frequency estimation of nonstationary multi-harmonic signals is important in many applications. In this paper, we propose a novel multi-frequency tracker based on a state-space representation of the signal with Cartesian filters and the second-order central divided difference filter (CDDF), which improves the performance of the extended Kalman filter (EKF) by using Stirling's interpolation method to approximate the mean and covariance of the state vector. A crucial element of the method is the adaptive scaling of the process noise covariance matrix appearing in the filter equations, as a function of the innovation sequence, which tunes the accuracy-reactivity trade-off of the filter. The proposed solution is evaluated against two approaches from the literature, namely the factorized adaptive notch filter (FANF) and the extended Kalman filter frequency tracker (EKFFT). Several experiments emphasize the estimation accuracy of the proposed method as well as the improved robustness with respect to initial errors and input signal complexity. The presented method appears to be particularly efficient with rapidly varying frequencies, thanks to the update mechanism that adjusts the filter parameters based on the amplitude of the estimation error.     

变截面Z型折叠机翼振动特性的有限元与实验分析

Z型变截面折叠机翼作为一种可变体机翼结构,不同的折叠角对机翼稳定性有着重要的影响,因此研究不同折叠角度下的特性参数对机翼动态稳定性有着重要的意义.本文首先设计加工了Z型变截面可折叠机翼结构的实验模型,通过建立与实验模型相匹配的有限元模型,仿真得到不同折叠角度下机翼的前5阶固有频率和振型,针对不同折叠角度下机翼的固有特性,通过扫频实验得到机翼前5阶固有频率和模态振型,以及横向外激励作用下三段翼的频响曲线,对比分析有限元仿真与实验结果,验证结果的可靠性,这将对机翼结构设计以及特性参数的选取提供参考依据.     

基于宽频复电阻率的含黏土沉积物中水合物饱和度计算方法

天然气水合物沉积物中的黏土成分显著影响沉积物的电学特性以及水合物饱和度的计算模型。以自主设计开发的复电阻率参数测量装置为实验平台,在20 Hz ~ 100 kHz频率范围内测试了黏土条件下含水合物海沙体系的复电阻率,分析了复电阻率的频散特性、黏土影响以及主导的电极化机制,利用泥质修正Archie公式建立了基于宽频复电阻率的水合物饱和度计算模型。研究结果表明：（1）含水合物海沙体系的复电阻率呈现出显著的频散特性,双电层极化和界面极化分别是20 Hz ~ 1 kHz和1 ~ 100 kHz频段主导的极化机制;（2）黏土颗粒表面的双电层发生形变增强了含水合物沉积物双电层极化作用,提高了复电阻率相角和虚部的绝对值;（3）在20 Hz ~ 100 kHz频率范围内泥质修正Archie公式岩性系数较为稳定,而胶结指数和饱和度指数与测试频率之间的关系在20 Hz ~ 1 kHz和1 ~ 100 kHz频段差异显著,因此应分频段建立水合物饱和度计算模型。本研究为探讨含水合物沉积物的低频电学特性和建立含黏土沉积物中水合物饱和度计算模型提供了新的途径。     

应用PMO提高连铸坯生产拉速及成分均匀性

为了实现电炉厂提产增效的目标,研究了脉冲磁致振荡(PMO)在提高铸坯生产拉速中的应用潜能。结果表明,优化PMO处理参数可以适应生产拉速提高的要求,并改善铸坯的中心偏析和宏观偏析。当连铸拉速提至1.05 m/min,PMO脉冲频率为1.16K_f Hz,峰值电压为1.00K_iV处理参数(K_f和K_i分别为仪器的放电频率和电压峰值)时, 铸坯横断面碳偏析指数可控制在1±0.05内;当连铸拉速提至1.15 m/min,PMO脉冲频率为1.28K_fHz,峰值电压为1.00K_iV处理参数时,铸坯横断面碳偏析指数可控制在1±0.07内。试验证明,在高拉速条件下通过保证单位时间内对钢液施加的脉冲能量可以使连铸坯质量得到有效改善。     

Enhanced electrical and photoluminescence properties of BiSbO4-doped CaCu3Ti4O12 ceramics by modifying grain boundary response

CaCu₃Ti₄O₁₂-xwt%BiSbO₄ ceramics (CCTO-xwt%BSO, x = 0, 1, 2, 3) were prepared by solid-state reaction method. The microstructure, dielectric properties, varistor properties, photoluminescence properties of CCTO-xwt%BSO ceramics were studied in this work. Results showed that all samples formed CaCu₃Ti₄O₁₂ (CCTO) single phase. Doping BiSbO₄ (BSO) restrained the abnormal grain growth and increased the grain boundary density of ceramics. The introduction of BSO led to the increase of the grain boundary resistance, reducing the dielectric loss and enhancing the temperature stability of dielectric properties. The nonlinear electrical characteristics are enhanced with proper concentration of BSO. And the improved varistor performance with breakdown electric field of ～3.98–34.6 and nonlinear coefficient of ～1.49–2.96 are obtained for CCTO-xwt%BSO samples. In addition, the photoluminescent emission of the samples is enhanced with the addition of appropriate equivalent BSO, showing the potential applications in novel devices with photoluminescent/electrical multifunctional properties.